PDU15SWHVIEC12ATNET

Switched ATS PDU Series


PDU15SWHVIEC12ATNET | Switched ATS PDU Series
Deliver and monitor reliable, redundant power to electronic equipment, servers, and network/telecom devices

Product Overview


The CyberPower PDU15SWHVIEC12ATNET, a 12-outlet (rear), 1U rackmount switched automatic transfer switch (ATS) power distribution unit (PDU), provides 200-240V 15A output. It distributes unfiltered electrical pass-through to 12 IEC-320 C13 receptacles from redundant IEC-320 C14 plugs. Dual power cords can be plugged into separate power sources to provide redundancy to single-corded connected equipment. If power for the primary source exceeds the lower or upper thresholds, or if power fails, the PDU will switch to the secondary power source to ensure continuous operation. The PDU will switch back to the primary power source when incoming power becomes stable.

The PDU15SWHVIEC12ATNET includes a SNMP/HTTP card (RMCARD203). With the SNMP card and an IP address on the network interface, users have real-time monitoring and outlet control of the PDU. The switched outlet receptacles can be managed individually or collectively. The LCD panel provides local monitoring of the PDU and on/off control for the outlets. It can also be used to measure the electrical current (displayed in amperes) used by connected equipment. The LCD panel also shows input and output voltages, active power consumption levels (displayed in kilowatts), and hardware and firmware versions.

Designed for datacenters and other demanding electrical applications, the PDU15SWHVIEC12ATNET has rugged, industrial-grade metal housing, a 10-foot AC power cord, and a cord retention tray. It can be mounted horizontally and is UL and CSA certified by ETL, and Class A FCC-certified. A three-year warranty covers the PDU and connected equipment for as long as you own the product.

  • Power Distribution
    Delivers AC power to servers, equipment, and connected devices via a power distribution unit.
  • Outlet Switching
    Output receptacles can be turned on, turned off, or recycled on demand or at programmed times to address a number of needs, including remote rebooting of locked equipment, load shedding, power sequencing, and locking out unauthorized loads.
  • Automatic Transfer Switch
    Dual power cords (A & B) provide redundant power sources to devices with single power supplies and can be plugged into separate sources to ensure continous access. Users select the preferred source as the primary input.
  • LCD Panel
    Provides real-time meter status for current (amperes), input and output voltages, power consumptions (kilowatts), and hardware/firmware versions.
  • Upgradeable Hardware & LCD Firmware
    Are updatable to the latest versions by using the serial communication port and included cable.
  • Serial Communication Port & Cable
    Used to update/upgrade the hardware and LCD firmware.
  • Environmental Sensor Option
    Supports optional environment sensor (ENVIROSENSOR).
  • SNMP/HTTP Card (RMCARD203)
    Included and installed, RMCARD203 provides outlet control, remote monitoring, reporting, and event notifications, via Email, SMS Text, or SNMP Trap. RMCARD203 firmware is upgradeable with FTP process.
  • Protocol Support
    This Switched ATS PDU provides protocol support for PowerPanel Business Edition, HTTP, TCP/IP, UDP, DHCP, and SNMP including SNMPv3, and IPv4, IPv6, NTP, SMTP protocols.
  • Administrative Rights
    Administrator and user rights can be established to provide IT personnel with access to the Management Console via a web browser to monitor and/or manage the PDU settings.
  • Switchless Design
    Designed without a power switch and circuit breaker (on most models) to prevent accidental power interruptions.
  • Network-Grade Plugs and Outlets
    Highly durable construction ensures the efficient distribution of power in demanding IT or industrial environments to servers, equipment, and connected devices.
  • Rackmounting Brackets
    Allow for 1U horizontal rack installation.
  • Cord Retention Brackets
    Secures power cords, keeping them organized and accessible. Helps cords stay plugged in.
  • Three-Year Limited Warranty
    Covers the PDU for three years and connected equipment for as long as you own the product. See warranty for details.

What's In The Box

ATS PDU, 2 Mounting Brackets, 24 M4x8 Bracket Mounting Screws, 6 M5x12 Rack Mounting Screws, 6 Washers, Cord Retention Tray, 2 M3x4 Cord Retention Tray Mounting Screws, 21 Cable Ties, RJ45/DB9 Serial Port Connection Cable, Jumper, User Manual, Registration Card, CD, 3 IEC Socket Power Cord Stands, 22 M3x4 Screws, Power Cord 10 feet IEC-320 C13/C14 x 2, 21 Power Cord Retention Cable Clips, 21 Cable Ties (IEC Type ATS)

PDU15SWHVIEC12ATNET | Switched ATS PDU Series
Deliver and monitor reliable, redundant power to electronic equipment, servers, and network/telecom devices
Input  
Nominal Input Voltage 200 – 240 VAC
Frequency 50/60 Hz
Maximum Current 15A (derated to 12A)
On/Off Switch No
Plug Type 2 x IEC-320 C14
Plug Style Straight (Socket)
Cord Length 10 ft
Output  
Nominal Output Voltage 200 – 240 VAC
Outlet Banks 1
Outlets - Total 12
Outlets - Front 0
Outlets - Rear 12
Outlet Type IEC-320 C13
LCD Readout KW
Voltage
Amperage
Network Information
HW/FW Version
LED Indicators Input
Output Load
Tx/Rx
LINK
Outlets
Communication  
SNMP / HTTP Remote Monitoring RMCARD203 (Installed)
RMCARD205 (sold separately)
Protocols TCP/IP
UDP
DHCP
SNMP
HTTP
Connectivity Network
Environmental Sensor
Serial
Physical  
Dimensions - H×W×D (in) 1.75 × 17.05 × 9.3 inches
Rack Size 1U
Weight (lbs) 8.82 lbs
Style Rackmount
Form Factors Supported 1U rackmount
Cord Retention Tray/Cord Organizers Yes
Adjustable Mounting Brackets 1 set (L-long)
External Site Ground Pin Yes
Environmental  
Operating Temperature 32 – 113 °F (0 – 45°C)
Operating Humidity 0 – 95% (non-condensing)
Maximum Operating Elevation 13,100 ft (4,000 m)
Storage Temperature 5 – 113 °F (-15 – 45°C)
Maximum Storage Elevation 50,000 ft (15,000 m)
Certifications  
Safety UL60950_1 certified by ETL
CSA C22.2
FCC Class A
Environmental RoHS Compliant
Warranty  
Product Warranty 3 year
PDU15SWHVIEC12ATNET | Switched ATS PDU Series
Deliver and monitor reliable, redundant power to electronic equipment, servers, and network/telecom devices
Understanding PDUs

Power Distribution Units (PDUs) by CyberPower are engineered to distribute reliable network power to multiple devices. A PDU does not generate conditioned power, but delivers AC power from a UPS (uninterruptible power supply), a generator, or utility power source to servers, network/telecom equipment, and other devices. Selecting the best PDU for your needs depends on the output voltage required, the number of outlets needed for connected devices, plug and outlet types, and mounting options.

Versatile. CyberPower PDUs are designed with as many as 38 outlets. Offered in 0U, 1U, and 2U form factors, each PDU includes the necessary hardware to be mounted vertically or horizontally inside densely configured rack enclosures. The PDU can also be mounted on a wall or under a shelf.

Scalable. In smaller networks, conditioned power can be distributed through a single PDU from a UPS, while a complex data center might require the connection of multiple PDUs to a large-capacity UPS system.


Different PDU Series for Different Needs

CyberPower offers multiple offerings of power distribution units (PDUs): Basic, Metered, Metered ATS, Monitored, Switched, Switched ATS and Maintenance-Bypass. Each series serves a specialized purpose. Models within the same series have similar features and capabilities.

Basic PDU Series: Reliable and unfiltered AC power distribution from a UPS system, generator, and/or utility source to multiple connected devices.

Metered PDU Series: Network-grade power distribution plus load meters (amps) to prevent overloads and safely optimize load levels.

Metered ATS PDU Series: Redundant NEMA plugs. Dual power cords can be plugged into separate power sources. If power for the primary source exceeds the lower or upper thresholds, or if power fails, the PDU will switch to the secondary power source to ensure continuous operation.

Monitored PDU Series: Network-grade power distribution with remote monitoring through an SNMP network interface and local management via a digital meter display to prevent down time due to overloads or other power events.

Switched PDU Series: Intelligent, network-grade power distribution and the ability to control outlets individually or collectively to solve power issues such as shutdowns or to plan scheduled rebooting. A digital meter provides information on load and voltage, as well as local control of the outlets. An SNMP connection enables remote monitoring and control of the outlets to ensure complete control regardless of location.

Switched ATS PDU Series: Individual management of switched outlet receptacles. Remote and local control of outlets. Redundant NEMA plugs. Dual power cords can be plugged into separate power sources. If power for the primary source exceeds the lower or upper thresholds, or if power fails, the PDU will switch to the secondary power source to ensure continuous operation.

Maintenance-Bypass Maintenance Bypass PDUs allow the seamless transfer of an electrical load from UPS power to utility power for uninterrupted operation of connected equipment when performing maintenance, replacing batteries, or installing a new UPS.


Power Device Network Utility

The Power Device Network Utility gives users an easy-to-use interface for establishing the IP addresses of CyberPower PDU devices, RM Cards, and PowerPanel Business Edition Agents and Clients. It scans network devices with MAC addresses that match CyberPower network hardware. Once found, the device(s) can then be configured with a specific IP address, subnet mask, and gateway address, allowing the device(s) to work properly on the network and to integrate with the CyberPower Management Console.

PDU15SWHVIEC12ATNET | Switched ATS PDU Series
Deliver and monitor reliable, redundant power to electronic equipment, servers, and network/telecom devices

Mainboard Firmware Release Note 1.04

LCD Firmware Release Note 1.40

Firmware User Manual 1.04

Find the PDU/RMCARD's IP Address

Updated MIB File

Upgrade firmware and/or configure multiple CyberPower RMCARDs or monitored, switched PDUs at once.

Switched / Metered ATS LCD v1.40

Switched / Metered ATS Mainboard v1.04

PDU15SWHVIEC12ATNET | Switched ATS PDU Series
Deliver and monitor reliable, redundant power to electronic equipment, servers, and network/telecom devices
Do any of the CyberPower PDUs have an on/off switch?

No. None of the PDUs will have on/off switches on them. All CyberPower PDUs are always on by design.

PDU15SWHVIEC12ATNET | Switched ATS PDU Series
Deliver and monitor reliable, redundant power to electronic equipment, servers, and network/telecom devices
Model Voltage Current Input Plug Outlets MSRP
PDU15SW10ATNET 100 – 120 VAC 15 A
(derated to 12 A)
2 x NEMA 5-15P 10 NEMA 5-15R $610.00
PDU15SWHVIEC12ATNET 200 – 240 VAC 15 A
(derated to 12 A)
2 x IEC-320 C14 12 IEC-320 C13 $629.00
PDU20SW10ATNET 100 – 120 VAC 20 A
(derated to 16 A)
2 x NEMA 5-20P 10 NEMA 5-20R $637.00
PDU20SWT10ATNET 100 – 120 VAC 20 A
(derated to 16 A)
2 x NEMA L5-20P 10 NEMA 5-20R $648.00
PDU20SWHVT10ATNET 200 – 240 VAC 20 A
(derated to 16 A)
2 x L6-20P 8 IEC-320 C13
2 IEC-320 C19
$669.00
PDU20SWHVIEC10ATNET 200 – 240 VAC 20 A
(derated to 16 A)
2 x IEC-320 C20 8 IEC-320 C13
2 IEC-320 C19
$679.00
PDU30SWT17ATNET 100 – 120 VAC 30 A
(derated to 24 A)
2 x NEMA L5-30P 16 NEMA 5-20R
1 NEMA L5-30R
$895.00
PDU30SWHVT19ATNET 200 – 240 VAC 30 A
(derated to 24 A)
2 x L6-30P 16 IEC-320 C13
2 IEC-320 C19
$849.00
Ask a CyberPower tech support representative to contact you.



CyberPower Systems values your privacy and your information will never be rented or sold. Information provided will be used for CyberPower's internal use only. View our Privacy Policy.

Please enter the username or email associated with your My CyberPower account.


Thank you! You should receive an email shortly with information on how to change your password.

CyberPower Systems values your privacy and your information will never be rented or sold. Information provided will be used for CyberPower's internal use only. View our Privacy Policy.

Thank you for submitting your information. A CyberPower representative will get in contact with you shortly.


An error has occurred while you were attempting to submit this form - please try again. If the problem persists, please call our sales hotline at 1 (877) 297-6937. Thank you!