The rack/tower convertible BP48V75ART2UTAA Extended Battery Module (EBM) from CyberPower ensures extended battery runtimes during power outages for Smart App Sinewave UPS models PR1000LCDRTXL2Ua, PR1500LCDRTXL2U, PR2200LCDRTXL2U, PR3000LCDRT2U and Smart App Intelligent LCD UPS models OR1500LCDRTXL2U and OR2200LCDRTXL2U. This EBM complies with the U.S. Trade Agreement Act (TAA). It takes up 2U of rack space and can be installed as a tower to match the UPS form factor. The BP48V75ART2UTAA typically has a UPS charging time of eight hours. It comes with a three-year warranty.
|Battery Type||Sealed Lead-Acid|
|Typical Recharge Time||8 hours|
|Replacement Battery||BB Battery - HR9-12|
|Dimensions - W×H×D (in)||17.25 × 3.5 × 19.5 inches|
|Weight (lbs)||67.0 lbs|
|Operating Temperature||32 – 95 °F (0 – 35 °C)|
|Operating Humidity||0 – 90% (non-condensing)|
|Storage Temperature||5 – 113 °F (-15 – 45 °C)|
|Maximum Operating Elevation||10,000 ft (3,000 m)|
|Maximum Storage Elevation||50,000 ft (15,000 m)|
FCC DOC Class B
|Product Warranty||3 Years Limited|
Fast Charge Technology and Smart Battery Management (SBM) prolong the capacity and life of a UPS battery. This provides greater efficiency and fewer battery replacements.
Fast Charge Technology enables the backup power supply to more quickly return to full capacity (100%) because each Extended Battery Module attached to the UPS uses its own charger. Typical systems share only a single charger for all attached battery modules, which increases the time required to fully restore backup power.
Smart Battery Management (SBM) charges a UPS battery in three phases, extending its functional life. SBM also reduces the heat produced by a UPS battery and reduces battery deterioration.
To determine the size of the UPS that you need, identify the total power load (measure in VA/Watts) of the connected equipment, along with the amount of runtime required (in minutes). Also, think about any equipment that might be connected to the UPS in the future, which could affect the calculations for load and runtime.
Estimating expected UPS runtimes can be challenging, particularly when the consistency of the utility power is not well known. Selecting a UPS with a load capacity 30-35% above the required power load offers the advantage of longer runtimes. This can lower the risk of overloading the UPS and causing an unnecessary UPS shutdown.
Although the initial outlay of a UPS increases with its size because of the higher capacity required for components, long-term operating costs typically decrease. When a UPS operates below maximum capacity, it reduces the stress on components. Sizing a UPS to run loads significantly lower than its capacity also increases spare capacity for future growth, along with extending runtimes.
|Model||Output VA||Output Watts||Outlets||MSRP|
|CP550SLGTAA||550 VA||330 W||8 NEMA 5-15R||$72.95|
|EC750GTAA||750 VA||450 W||12 NEMA 5-15R||$138.95|
|CP1000PFCLCDTAA||1000 VA||600 W||10 NEMA 5-15R||$202.95|
|CP1500PFCLCDTAA||1500 VA||900 W||10 NEMA 5-15R||$304.95|
|PR1000LCDTAA||1000 VA||700 W||8 NEMA 5-15R||$455.95|
|PR1500LCDTAA||1500 VA||1050 W||8 NEMA 5-15R||$529.95|
|PR1000LCDRT2UTAA||1000 VA||700 W||8 NEMA 5-15R||$529.95|
|PR1500LCDRT2UTAA||1500 VA||1000 W||8 NEMA 5-15R||$709.95|
|PR1500LCDRTXL2UTAA||1500 VA||1125 W||8 NEMA 5-15R||$810.95|
|PR2200LCDRTXL2UTAA||2150 VA||1650 W||8 NEMA 5-15R||$1119.95|
|PR3000LCDRTXL2UTAA||3000 VA||2400 W||7 NEMA 5-15R||$1349.95|
|PR5000LCDRTXL5UTAA||5000 VA||4000 W||7 NEMA 5-15R||$2595.95|