PR2200LCDRTXL2UTAA

TAA UPS Systems


PR2200LCDRTXL2UTAA | TAA UPS Systems
Federal Trade Agreements Act (TAA) compliant power protection

Product Overview


The CyberPower Smart App Sinewave PR2200LCDRTXL2UTAA is a rack/tower convertible UPS with line interactive topology. It complies with the U.S. Trade Agreement Act (TAA). This model provides battery backup, power protection (using sine wave output), and surge protection for corporate servers, department servers, storage appliances, network devices, and telecom installations requiring Active PFC power source compatibility.

The PR2200LCDRTXL2UTAA uses Automatic Voltage Regulation (AVR) to correct minor power fluctuations without switching to battery power, which extends battery life. AVR is essential in areas where power fluctuations occur frequently. This model comes with a three-year warranty (including coverage of batteries) and a $400,000 Connected Equipment Guarantee.

  • Battery Backup
    Supplies power long enough for equipment to properly shut down when utility power fails. Helps prevent loss of data and minimizes the component stress caused by a hard shutdown.
  • Surge Protection
    Diverts excess voltage away from sensitive electronic equipment during an AC power surge or power spike to prevent damage.
  • Data Line Protection
    Prevents power surges that travel through telephone, coaxial, and Ethernet lines from causing damage to electronics.
  • Line Interactive Topology
    Exists when a line interactive UPS has an autotransformer that regulates low voltages (e.g., brownouts) and over voltages (e.g., spikes) without having to switch to battery.
  • Automatic Voltage Regulation (AVR)
    Provides clean, consistent AC power by automatically increasing (boosting) low voltage without using battery power when incoming utility power experiences minor fluctuations.
  • Sine Wave Output
    Provides power protection to ENERGY STAR® 6.0 systems with Active PFC power supplies.
  • GreenPower UPS™ Bypass Design
    Is a patented design that allows utility power to bypass the UPS transformer, when AC power is stable, which reduces energy consumption, noise, and heat buildup.
  • Rotatable Multifunction LCD Panel
    Displays immediate, detailed information on the UPS battery and power conditions, alerting users to potential problems before they can affect critical equipment and cause downtime. The rotatable panel is easily readable whether the UPS is rack mounted or standing as a tower.
  • Rack/Tower Versatility
    Allows for horizontal rack or vertical tower installation.
  • PowerPanel® Business Edition Software
    Provides IT professionals with tools for monitoring and managing the UPS and backup power. This software offers remote management functionality. Free software download available. See the Resources tab.
  • Cisco Compatible
    This CyberPower UPS system is a Cisco EnergyWise compliant end device.
  • ENERGY STAR
    This model is an ENERGY STAR® certified Uninterruptible Power Supply (UPS) system. ENERGY STAR is the trusted, government-backed symbol for energy-efficient products and practices that help save money and protect the environment.
  • Three-Year Warranty
    CyberPower will repair or replace a defective UPS system (including batteries) within three years of the purchase date. See warranty for details.
PR2200LCDRTXL2UTAA | TAA UPS Systems
Federal Trade Agreements Act (TAA) compliant power protection
General  
UPS Topology Line Interactive
Energy Saving GreenPower UPS™ Bypass Technology
Input  
Voltage 80 – 150 VAC
Frequency 47 – 63 Hz
Plug Type NEMA 5-20P
Plug Style Right Angle, 45° Offset Right
Cord Length 10 ft
Output  
VA 2,150 VA
Watts 1,650 W
On Battery Voltage 120 VAC ± 5%
On Battery Frequency 50/60 Hz ± 0.5%
On Battery Waveform Sine Wave
Outlet Type NEMA 5-20R
Outlets - Total 8
Outlets - Battery & Surge Protected 8
Outlets - Surge-Only Protected 0
Outlets - Widely Spaced 0
Overload Protection Internal Circuitry Limiting
Circuit Breaker
Transfer Time 4 ms
Automatic Voltage Regulation Yes
Outlets - Critical Load 4
Battery  
Runtime at Half Load 14 minutes
Runtime at Full Load 5 minutes
Battery Type Sealed Lead-Acid
Battery Size 12V/9Ah
Battery Quantity 4
Hot-Swappable Yes
User Replaceable Yes
Replacement Battery Cartridge RB1290X4D
Replacement Battery Cartridge Quantity 1
Typical Recharge Time 8 hours
Extended Battery Option BP48V75ART2UTAA
Surge Protection & Filtering  
Surge Suppression 2,060 J
EMI/RFI Filtration Yes
Coax Protection RG6 1-In, 1-Out
Phone RJ11 / Ethernet RJ45 1-In, 1-Out (Combo)
Management & Communications  
HID Compliant USB Port Yes
Serial Port Yes (2x)
LED Indicators Power On
Wiring Fault
Audible Alarms On Battery
Low Battery
Overload
Software PowerPanel® Business Edition
Multifunction LCD Panel Displays:
Load/Current Level
Runtime
Battery Level
Temperature
Battery In Use
Input Voltage
Output Voltage
Output Frequency
Overload
Wiring Fault
Battery Shutdown Voltage
Static Frequency Tolerance
Slew Rate
Silent Mode
Normal Mode
Emergency Power Off (EPO) Port Yes
SNMP / HTTP Remote Monitoring Yes, with optional RMCARD202TAA, RMCARD203 or RMCARD205
AS400 Management None
Physical  
Form Factor Rack/Tower
Dimensions - W×H×D (in) 17.25 × 3.5 × 19.5 inches
Weight (lbs) 76.0 lbs
Rack Size 2U
Environmental  
Operating Temperature 32 – 95 °F (0 – 35 °C)
Operating Humidity 0 – 95% (non-condensing)
Storage Temperature 5 – 113 °F (-15 – 45 °C)
Maximum Operating Elevation 10,000 ft (3,000 m)
Maximum Storage Elevation 50,000 ft (15,000 m)
Certifications  
Safety UL1778
cUL 107.1
FCC DOC Class B
Environmental RoHS Compliant
Warranty  
Product Warranty 3 Years Limited
Connected Equipment Guarantee Lifetime
CEG Amount $400,000
PR2200LCDRTXL2UTAA | TAA UPS Systems
Federal Trade Agreements Act (TAA) compliant power protection
Higher Capacity UPS for Longer Runtimes

To determine the size of the UPS that you need, identify the total power load (measure in VA/Watts) of the connected equipment, along with the amount of runtime required (in minutes). Also, think about any equipment that might be connected to the UPS in the future, which could affect the calculations for load and runtime.

Estimating expected UPS runtimes can be challenging, particularly when the consistency of the utility power is not well known. Selecting a UPS with a load capacity 30-35% above the required power load offers the advantage of longer runtimes. This can lower the risk of overloading the UPS and causing an unnecessary UPS shutdown.

Although the initial outlay of a UPS increases with its size because of the higher capacity required for components, long-term operating costs typically decrease. When a UPS operates below maximum capacity, it reduces the stress on components. Sizing a UPS to run loads significantly lower than its capacity also increases spare capacity for future growth, along with extending runtimes.


Efficient Remote Management

The Smart App Series offers full-featured network UPS management capabilities with the PowerPanel® Business Edition software and an optional SNMP network management card. These remote management tools enable centralized power management, monitoring, control, and configuration. They also provide for safe shutdown of connected servers, workstations, and other devices via a standard Web browser or network management system (NMS).

Safe Shutdown

The PowerPanel® Business Edition software, included with every Smart App Sinewave UPS, enables an administrator to remotely manage each aspect of the UPS and facilitate the orderly automatic shutdown of connected equipment in the event of an extended power outage. This software also provides comprehensive network power management for corporate servers and critical workstations supported by the UPS, such as application/operating system shutdown, event logging, reporting, alerts and notifications.

Programmable Outlet Control

Smart App UPS systems allow programming of critical outlets and non-critical outlets, giving administrators the ability to prioritize outlets and increase battery backup runtimes for the most critical equipment during extended power outages. Programmable outlet control also gives an administrator the option to delay-start non-critical outlets, permitting the internal batteries to fully recharge more quickly. This feature is vital to data centers where seamless, uninterrupted equipment bootup is a necessity.


GreenPower UPS Technology

GreenPower UPS™ Technology from CyberPower consists of three different energy-saving designs that improve operating efficiency, reduce heat generation, and consume less power than conventional UPS models.

ECO Mode: Our ECO Mode is a form of bypass technology that can be switched on full time, set for noncritical times (such as nights and weekends), or switched off. This flexibility can help conserve power and save money.

Bypass Design: Our patented bypass design allows current to bypass the transformer and automatic voltage regulation (AVR) when utility power is normal, thus reducing energy consumption and associated costs. Because utility power functions normally most of the time, the bypass design allows for substantial energy savings. This technology also reduces heat generation, an important factor in decreasing operating costs.

High-Efficiency Design: significantly decreases power consumption to create an ultra-efficient backup battery for home and office use.

PR2200LCDRTXL2UTAA | TAA UPS Systems
Federal Trade Agreements Act (TAA) compliant power protection

Shutdown software supports most Window systems

Shutdown software supports most Linux and XenServer

Shutdown software supports most Linux, XenServer, ESX, ESXi

Shutdown software supports VMWARE vSphere, ESXi 4.1 and later

Shutdown software supports VMWARE vSphere, ESXi 4.1 and later

Shutdown software supports most Mac systems

PR2200LCDRTXL2UTAA | TAA UPS Systems
Federal Trade Agreements Act (TAA) compliant power protection
What is the difference between the Battery/Surge outlets and the Surge outlets?

Many CyberPower UPS units have two sets of outlets. One set is labeled "Battery/Surge" and one set is labeled "Surge". The outlets labeled "Battery/Surge" are the outlets that will receive battery power during a power failure. You should plug your computer and monitor into these outlets and any externally powered critical data storage device.

Items such as printers, speakers, scanners, and faxes should be plugged into the outlets labeled "Surge." These outlets are intended for low priority electronics that are not essential to the PC's main operation.

PR2200LCDRTXL2UTAA | TAA UPS Systems
Federal Trade Agreements Act (TAA) compliant power protection
Model Output VA Output Watts Outlets MSRP
CP550SLGTAA 550 VA 330 W 8 NEMA 5-15R $72.95
EC750GTAA 750 VA 450 W 12 NEMA 5-15R $138.95
CP1000PFCLCDTAA 1000 VA 600 W 10 NEMA 5-15R $202.95
CP1500PFCLCDTAA 1500 VA 900 W 10 NEMA 5-15R $304.95
PR1000LCDTAA 1000 VA 700 W 8 NEMA 5-15R $455.95
PR1500LCDTAA 1500 VA 1050 W 8 NEMA 5-15R $529.95
PR1000LCDRT2UTAA 1000 VA 700 W 8 NEMA 5-15R $529.95
PR1500LCDRT2UTAA 1500 VA 1000 W 8 NEMA 5-15R $709.95
PR1500LCDRTXL2UTAA 1500 VA 1125 W 8 NEMA 5-15R $810.95
PR2200LCDRTXL2UTAA 2150 VA 1650 W 8 NEMA 5-15R $1119.95
PR3000LCDRTXL2UTAA 3000 VA 2400 W 7 NEMA 5-15R $1349.95
PR5000LCDRTXL5UTAA 5000 VA 4000 W 7 NEMA 5-15R $2595.95
PR2200LCDRTXL2UTAA | TAA UPS Systems
Federal Trade Agreements Act (TAA) compliant power protection
Ask a CyberPower tech support representative to contact you.



CyberPower Systems values your privacy and your information will never be rented or sold. Information provided will be used for CyberPower's internal use only. View our Privacy Policy.

Please enter the username or email associated with your My CyberPower account.


Thank you! You should receive an email shortly with information on how to change your password.

CyberPower Systems values your privacy and your information will never be rented or sold. Information provided will be used for CyberPower's internal use only. View our Privacy Policy.

Thank you for submitting your information. A CyberPower representative will get in contact with you shortly.


An error has occurred while you were attempting to submit this form - please try again. If the problem persists, please call our sales hotline at 1 (877) 297-6937. Thank you!