A mini-tower UPS with line interactive topology, the CyberPower PFC Sinewave CP1500PFCLCD provides battery backup, power protection (using sine wave output), and surge protection for desktop computers, workstations, networking devices, and home entertainment systems requiring active PFC power source compatibility. The CP1500PFCLCD uses Automatic Voltage Regulation (AVR) to correct minor power fluctuations without switching to battery power, which extends battery life. AVR is essential in areas where power fluctuations occur frequently.
Two USB charge ports (1 Amp shared) power portable devices such as mobile phones, MP3 players, and cameras. The CP1500PFCLCD comes with a three-year warranty (including coverage of batteries) and a $500,000 Connected Equipment Guarantee.
UPS System, User Manual, Telephone Cable, PowerPanel Personal Edition Software CD, Coaxial Cable, USB A+B Type Cable, Warranty Registration Card, Function Setup Guide
|UPS Topology||Line Interactive|
|Energy Saving||GreenPower UPS™ Bypass Technology|
|Active PFC Compatible||Yes|
|Voltage||90 – 139 VAC|
|Frequency||57 – 63 Hz|
|Plug Type||NEMA 5-15P|
|Plug Style||Right Angle, 45° Offset Right|
|Cord Length||5 ft|
|Adjustable Voltage Range||78 – 142 VAC|
|Automatic Voltage Regulation (line mode)||12%|
|On Battery Voltage||120 VAC ± 5%|
|On Battery Frequency||60 Hz ± 1%|
|On Battery Waveform||Sine Wave|
|Outlets - Total||10|
|Outlets - Battery & Surge Protected||5|
|Outlets - Surge-Only Protected||5|
|Overload Protection||Internal Circuitry Limiting
|Transfer Time||4 ms|
|USB Charge||Yes - Two (2) USB 5V/1A charging ports|
|Runtime at Half Load||11 minutes|
|Runtime at Full Load||2 minutes|
|Battery Type||Sealed Lead-Acid|
|Replacement Battery Cartridge||RB1280X2B|
|Replacement Battery Cartridge Quantity||1|
|Typical Recharge Time||8 hours|
|Surge Protection & Filtering|
|Surge Suppression||1,030 J|
|Coax Protection RG6||1-In, 1-Out|
|Phone RJ11 / Ethernet RJ45||1-In, 1-Out (Combo)|
|Management & Communications|
|HID Compliant USB Port||Yes|
|LED Indicators||Power On
|Audible Alarms||On Battery
|Software||PowerPanel® Personal Edition|
|Multifunction LCD Panel||Displays:
AVR In Use
Battery In Use
|Management Cable||USB Cable|
|Emergency Power Off (EPO) Port||No|
|Dimensions - W×H×D (in)||3.9 × 10.4 × 14.2 inches|
|Weight (lbs)||24.7 lbs|
|Operating Temperature||32 – 104 °F (0 – 40 °C)|
|Operating Humidity||0 – 90% (non-condensing)|
FCC DOC Class B
|Product Warranty||3 Years Limited|
|Connected Equipment Guarantee||Lifetime|
GreenPower UPS™ Technology from CyberPower consists of three different energy-saving designs that improve operating efficiency, reduce heat generation, and consume less power than conventional UPS models.
ECO Mode: Our ECO Mode is a form of bypass technology that can be switched on full time, set for noncritical times (such as nights and weekends), or switched off. This flexibility can help conserve power and save money.
Bypass Design: Our patented bypass design allows current to bypass the transformer and automatic voltage regulation (AVR) when utility power is normal, thus reducing energy consumption and associated costs. Because utility power functions normally most of the time, the bypass design allows for substantial energy savings. This technology also reduces heat generation, an important factor in decreasing operating costs.
High-Efficiency Design: significantly decreases power consumption to create an ultra-efficient backup battery for home and office use.
In the U.S., utility companies provide power to households and offices by distributing single phase alternating current (AC) power at a frequency of 60 Hz. Electrical power can be graphically depicted as a sine wave whereby the electrical signal alternates from +120 volts to -120 volts at a rate of 60 times per second (60 Hz). To enable more efficient operation of large, heavy equipment, utility companies provide commercial and industrial locations with three phase AC power which consists of three overlapping sine waves offset by 120 degrees.
Although utility companies strive to distribute 100% sine wave power, many factors can introduce electrical noise into the AC power signal in the form of sine wave distortions and as voltage sags, surges, spikes, or other irregularities. Sine wave power is important for the optimal functioning of sensitive desktop computers and related peripheral equipment. Without sine wave power output, microprocessor-based equipment can become inoperative or sustain damage from power signal distortions.
During the past thirty years, people have become more aware of the amount of energy used by IT equipment and devices. For many years, desktop computers and workstations inefficiently consumed power, partly due to the design of the power supplies which transformed AC power (from the wall outlet) to DC power (used by computers). This voltage transformation was relatively inefficient as reflected in low power factor ratings.
In 1992, the U.S. Environmental Protection Agency (EPA), in collaboration with advocates in the IT industry, developed the ENERGY STAR® program to prompt the development of energy-efficient products. Today this program is recognized as an international standard.
To comply with ENERGY STAR standards, manufacturers of desktop and workstation computers incorporate Active Power Factor Correction (Active PFC) as part of the engineering designs, enabling energy efficiencies of 95% or higher. Computers with Active PFC power supplies require sine wave AC power, as supplied by utility companies, for trouble-free operation. For this reason, sine wave UPS systems have become the best choice for backup power.
Simulated or stepped sine wave power, provided by entry-level UPS systems, may be problematic or incompatible with Active PFC devices. Sine wave power varies continuously from positive to negative. Simulated sine wave power mimics a sine wave by using a squared-off approximation. Due to this approximation, simulated sine wave power momentarily creates a zero power gap. When power is interrupted, a computer with an Active PFC power supply may not recognize incoming simulated sine wave power due to the zero output present in the approximated wave. This could cause the system to unexpectedly shut down or sustain system component stress.
|Model||Output VA||Output Watts||Outlets||MSRP|
|CP850PFCLCD||850 VA||510 W||10 NEMA 5-15R||$149.95|
|CP1000PFCLCD||1000 VA||600 W||10 NEMA 5-15R||$169.95|
|CP1350PFCLCD||1350 VA||810 W||10 NEMA 5-15R||$219.95|
|CP1500PFCLCD||1500 VA||900 W||10 NEMA 5-15R||$259.95|
|OR1000PFCLCD||1000 VA||700 W||8 NEMA 5-15R||$279.95|
|OR1500PFCLCD||1500 VA||1050 W||8 NEMA 5-15R||$349.95|
|OR1000PFCRT2U||1000 VA||700 W||8 NEMA 5-15R||$430.00|
|OR1500PFCRT2U||1500 VA||1050 W||8 NEMA 5-15R||$485.95|
|OR2200PFCRT2U||2000 VA||1540 W||8 NEMA 5-20R||$549.95|
|OR2200PFCRT2Ua||2200 VA||1320 W||8 NEMA 5-20R||$579.95|