A tower UPS with line interactive topology, the CyberPower OP1500 provides battery backup (using simulated sine wave output) and surge protection for department servers, workgroup servers, workstations, network devices, and telecom installations without active PFC power supplies. The OP1500 uses Automatic Voltage Regulation (AVR) to correct minor power fluctuations without switching to battery power, which extends battery life. AVR is essential in areas where power fluctuations occur frequently. The OP1500 comes with a three-year warranty and a $200,000 Connected Equipment Guarantee.
|UPS Topology||Line Interactive|
|Voltage||85Vac - 150Vac|
|Frequency||60Hz ± 3Hz|
|Plug Type||NEMA 5-15P|
|Plug Style||Right Angle|
|Automatic Voltage Regulation||Yes|
|On Battery Voltage||120Vac ± 5%|
|On Battery Frequency||60Hz ± 1%|
|On Battery Waveform||Simulated Sine Wave|
|Outlet Type||NEMA 5-15R|
|Outlets - Battery & Surge Protected||6|
|Overload Protection||Internal circuitry limiting / circuit breaker|
|Runtime at Half Load (min)||18|
|Runtime at Full Load (min)||6|
|Battery Type||Sealed Lead-Acid|
|Replacement Battery||BB Battery - BP7-12|
|Typical Recharge Time||8 Hours|
|Surge Protection & Filtering|
|Surge Suppression||1,796 Joules|
|Phone RJ11 / Ethernet RJ45||1-In, 1-Out (Combo)|
|Management & Communications|
|Serial Port||Yes (2x)|
|Cable Management||Serial Cable, USB Adapter|
|LED Indicators||Power On, Using Battery, AVR, Wiring Fault, Load Level, Battery Level|
|Audible Alarms||On Battery, Low Battery, Overload|
|Software||PowerPanel® Business Edition|
|SNMP / HTTP Remote Monitoring||Yes, with optional RMCARD100|
|Dimensions - W×H×D (in)||7 × 9.5 × 16.5 inches|
|Weight (lbs)||56.0 lbs|
|Operating Temperature||32 °F to 95 °F / 0 °C to 35 °C|
|Operating Humidity||0% - 95% non-condensing|
|Safety||UL1778, cUL, FCC DOC Class B|
|Product Warranty||3 Years Limited|
|Connected Equipment Guarantee||Lifetime|
The Smart App Series offers full-featured network UPS management capabilities with the PowerPanel® Business Edition software and an optional SNMP network management card. These remote management tools enable centralized power management, monitoring, control, and configuration. They also provide for safe shutdown of connected servers, workstations, and other devices via a standard Web browser or network management system (NMS).
The PowerPanel® Business Edition software, included with every Smart App Sinewave UPS, enables an administrator to remotely manage each aspect of the UPS and facilitate the orderly automatic shutdown of connected equipment in the event of an extended power outage. This software also provides comprehensive network power management for corporate servers and critical workstations supported by the UPS, such as application/operating system shutdown, event logging, reporting, alerts and notifications.
Programmable Outlet Control
Smart App UPS systems allow programming of critical outlets and non-critical outlets, giving administrators the ability to prioritize outlets and increase battery backup runtimes for the most critical equipment during extended power outages. Programmable outlet control also gives an administrator the option to delay-start non-critical outlets, permitting the internal batteries to fully recharge more quickly. This feature is vital to data centers where seamless, uninterrupted equipment bootup is a necessity.
Automatic Voltage Regulation (AVR) in line interactive UPS systems stabilizes the incoming AC signal to maintain output power at a nominal 120 volts by controlling high and low voltages without resorting to battery power. This significantly increases battery life and lessens the likelihood of data loss, memory freezes, and system crashes.
How AVR Works in a Line Interactive UPS
A line interactive UPS includes an AVR autotransformer—a special type of transformer designed to switch between powered coils of wire in response to variances in utility power input, thereby increasing or decreasing the magnetic field and the resulting output voltage to connected equipment.
This type of UPS tolerates undervoltage brownouts and overvoltage surges without consuming backup battery power by automatically selecting different power taps on the AVR autotransformer. During normal operation, incoming AC power bypasses the autotransformer (where voltage highs and lows are controlled) while also charging the battery. When the incoming voltage falls below the AVR range, the UPS switches to battery backup, and the DC-AC inverter circuitry is engaged. Power will continue to be supplied by the battery-inverter circuit until incoming voltage returns to the range manageable by the AVR.
|Model||Output VA||Output Watts||Outlets||MSRP|
|OR500LCDRM1U||500 VA||300 W||6 NEMA 5-15R||$175.00|
|OR700LCDRM1U||700 VA||400 W||6 NEMA 5-15R||$225.00|
|OR1000LCDRM1U||1000 VA||600 W||6 NEMA 5-15R||$369.00|
|OR1500LCDRM1U||1500 VA||900 W||6 NEMA 5-15R||$439.00|
|OR1500LCDRT2U||1500 VA||900 W||8 NEMA 5-15R||$399.00|
|OR2200LCDRT2U||2000 VA||1320 W||8 NEMA 5-20R||$479.00|
|OR1500LCDRTXL2U||1500 VA||1125 W||8 NEMA 5-15R||$499.00|
|OR2200LCDRTXL2U||2190 VA||1650 W||8 NEMA 5-20R||$649.00|
|CPS1500AVR||1500 VA||950 W||6 NEMA 5-15R||$379.95|