OP650

Smart App LCD UPS Series


OP650 | Smart App LCD UPS Series
Protect Small/Medium Business applications, CAD/CAM workstations, internetworking, and industrial applications

Product Overview


A tower UPS with line interactive topology, the CyberPower OP650 provides battery backup (using simulated sine wave output) and surge protection for department servers, workgroup servers, workstations, network devices, and telecom installations without active PFC power supplies. The OP650 uses Automatic Voltage Regulation (AVR) to correct minor power fluctuations without switching to battery power, which extends battery life. AVR is essential in areas where power fluctuations occur frequently. The OP650 comes with a three-year warranty and a $125,000 Connected Equipment Guarantee.

  • Data Line Protection
    Prevents power surges that travel through telephone and Ethernet lines from causing damage to electronics.
  • Surge Protection
    Diverts excess voltage away from sensitive electronic equipment during an AC power surge or power spike to prevent damage.
  • Line Interactive Topology
    Exists when a line interactive UPS has an autotransformer that regulates low voltages (e.g., brownouts) and over voltages (e.g., spikes) without having to switch to battery.
  • Automatic Voltage Regulation (AVR)
    Provides clean, consistent AC power by automatically increasing (boosting) low voltage without using battery power when incoming utility power experiences minor fluctuations.
  • Simulated Sine Wave Output
    Uses pulse wave modulation to generate a stepped, approximated sine wave to supply cost-effective battery backup power for equipment that does not require sine wave output.
  • LED Indicators
    LED status lights indicate Power-On, Using Battery, AVR Boost/Buck, and Load Level.
  • Audible Alarms
    Identify when the model is running off battery power, model overloads, and low battery.
  • Resettable Circuit Breaker
    Interrupts an electric current in a circuit when the current becomes too high.
  • PowerPanel® Plus
    Provides IT professionals with tools for viewing vitals about the UPS and backup power. Free software download available. See the Resources tab.
  • Three-Year Warranty
    CyberPower will repair or replace a defective UPS system (including batteries) within three years of the purchase date. See warranty for details.
  • Connected Equipment Guarantee
    CyberPower will repair or replace properly connected equipment if it is damaged by a power surge.
OP650 | Smart App LCD UPS Series
Protect Small/Medium Business applications, CAD/CAM workstations, internetworking, and industrial applications
General  
UPS Topology Line Interactive
Input  
Voltage 85Vac - 150Vac
Frequency 40Hz - 70Hz
Plug Type NEMA 5-15P
Plug Style Right Angle
Cord Length 6'
Output  
VA 650
Watts 350
Automatic Voltage Regulation Yes
On Battery Voltage 120Vac ± 5%
On Battery Frequency 60Hz ± 1%
On Battery Waveform Simulated Sine Wave
Outlet Type NEMA 5-15R
Outlets - Battery & Surge Protected 3
Outlets - Surge-Only Protected 3
Overload Protection Internal circuitry limiting / circuit breaker
Transfer Time 4ms
Battery  
Runtime at Half Load (min) 10
Runtime at Full Load (min) 2
Battery Type Sealed Lead-Acid
Battery Size 12V/7.2AH
Replacement Battery RB1270A
Battery Quantity 1
User Replaceable Yes
Typical Recharge Time 8 Hours
Surge Protection & Filtering  
Surge Suppression 1,796 Joules
Phone RJ11 / Ethernet RJ45 1-In, 1-Out (Combo)
Management & Communications  
Serial Port Yes
Cable Management Serial Cable, USB Adapter
LED Indicators Power On, Using Battery, AVR-Boost, AVR-Buck, Load Level
Audible Alarms On Battery, Low Battery, Overload
Software PowerPanel® Plus
SNMP / HTTP Remote Monitoring Yes, with optional RMCARD100
Physical  
Form Factor Tower
Dimensions - W×H×D (in) 3.5 × 6.5 × 11.5 inches
Weight (lbs) 15.0 lbs
Environmental  
Operating Temperature 32 °F to 95 °F / 0 °C to 35 °C
Operating Humidity 0% - 95% non-condensing
Certifications  
Safety UL1778, cUL, FCC DOC Class B
Environmental RoHS Compliant
Warranty  
Product Warranty 3 Years Limited
Connected Equipment Guarantee Lifetime
CEG Amount $125,000
OP650 | Smart App LCD UPS Series
Protect Small/Medium Business applications, CAD/CAM workstations, internetworking, and industrial applications
Efficient Remote Management

The Smart App Series offers full-featured network UPS management capabilities with the PowerPanel® Business Edition software and an optional SNMP network management card. These remote management tools enable centralized power management, monitoring, control, and configuration. They also provide for safe shutdown of connected servers, workstations, and other devices via a standard Web browser or network management system (NMS).

Safe Shutdown

The PowerPanel® Business Edition software, included with every Smart App Sinewave UPS, enables an administrator to remotely manage each aspect of the UPS and facilitate the orderly automatic shutdown of connected equipment in the event of an extended power outage. This software also provides comprehensive network power management for corporate servers and critical workstations supported by the UPS, such as application/operating system shutdown, event logging, reporting, alerts and notifications.

Programmable Outlet Control

Smart App UPS systems allow programming of critical outlets and non-critical outlets, giving administrators the ability to prioritize outlets and increase battery backup runtimes for the most critical equipment during extended power outages. Programmable outlet control also gives an administrator the option to delay-start non-critical outlets, permitting the internal batteries to fully recharge more quickly. This feature is vital to data centers where seamless, uninterrupted equipment bootup is a necessity.


Automatic Voltage Regulation

Automatic Voltage Regulation (AVR) in line interactive UPS systems stabilizes the incoming AC signal to maintain output power at a nominal 120 volts by controlling high and low voltages without resorting to battery power. This significantly increases battery life and lessens the likelihood of data loss, memory freezes, and system crashes.

How AVR Works in a Line Interactive UPS

A line interactive UPS includes an AVR autotransformer—a special type of transformer designed to switch between powered coils of wire in response to variances in utility power input, thereby increasing or decreasing the magnetic field and the resulting output voltage to connected equipment.

This type of UPS tolerates undervoltage brownouts and overvoltage surges without consuming backup battery power by automatically selecting different power taps on the AVR autotransformer. During normal operation, incoming AC power bypasses the autotransformer (where voltage highs and lows are controlled) while also charging the battery. When the incoming voltage falls below the AVR range, the UPS switches to battery backup, and the DC-AC inverter circuitry is engaged. Power will continue to be supplied by the battery-inverter circuit until incoming voltage returns to the range manageable by the AVR.

OP650 | Smart App LCD UPS Series
Protect Small/Medium Business applications, CAD/CAM workstations, internetworking, and industrial applications
OP650 | Smart App LCD UPS Series
Protect Small/Medium Business applications, CAD/CAM workstations, internetworking, and industrial applications
OP650 | Smart App LCD UPS Series
Protect Small/Medium Business applications, CAD/CAM workstations, internetworking, and industrial applications
Model Output VA Output Watts Outlets MSRP
OR500LCDRM1U 500 VA 300 W 6 NEMA 5-15R $175.00
OR700LCDRM1U 700 VA 400 W 6 NEMA 5-15R $225.00
OR1000LCDRM1U 1000 VA 600 W 6 NEMA 5-15R $369.00
OR1500LCDRM1U 1500 VA 900 W 6 NEMA 5-15R $439.00
OR1500LCDRT2U 1500 VA 900 W 8 NEMA 5-15R $399.00
OR2200LCDRT2U 2000 VA 1320 W 8 NEMA 5-20R $479.00
OR1500LCDRTXL2U 1500 VA 1125 W 8 NEMA 5-15R $499.00
OR2200LCDRTXL2U 2190 VA 1650 W 8 NEMA 5-20R $649.00
CPS1500AVR 1500 VA 950 W 6 NEMA 5-15R $379.95
Ask a CyberPower tech support representative to contact you.



CyberPower Systems values your privacy and your information will never be rented or sold. Information provided will be used for CyberPower's internal use only. View our Privacy Policy.

Please enter the username or email associated with your My CyberPower account.


Thank you! You should receive an email shortly with information on how to change your password.

CyberPower Systems values your privacy and your information will never be rented or sold. Information provided will be used for CyberPower's internal use only. View our Privacy Policy.

Thank you for submitting your information. A CyberPower representative will get in contact with you shortly.


An error has occurred while you were attempting to submit this form - please try again. If the problem persists, please call our sales hotline at 1 (877) 297-6937. Thank you!