Standby Series

CPS525SL | Standby Series
Protect desktop computers, networks, VoIP, and peripherals

Product Overview

The CyberPower 525SL not only guards against surges, spikes, sags, brownouts and other power abnormalities, but also protects your computer system and valuable data during a power outage. PowerPanel™ Software is included with each model. In the event of a power outage, PowerPanel® Software automatically saves and closes open files and then shuts down the computer system in an intelligent and orderly manner. The CPS525SL comes with a three-year warranty and a $50,000 Connected Equipment Guarantee.

    Provides shielding against electromagnetic interference and radio frequency signals. Most commonly, this is used to prevent line noise or "humming" that occurs over telephone lines or stereo electronics.
  • Transformer-Spaced Outlets
    Accommodate large transformer-based plugs without compromising the access of other outlets.
  • Surge Protection
    Diverts excess voltage away from sensitive electronic equipment during an AC power surge or power spike to prevent damage.
  • Data Line Protection
    Prevents power surges that travel through telephone lines from causing damage to electronics.
  • Standby Topology
    Ensures that when incoming power drops below or surges above safe voltage levels, the UPS switches to DC battery power and then inverts to AC power to run connected equipment.
  • Simulated Sine Wave Output
    Uses pulse wave modulation to generate a stepped, approximated sine wave to supply cost-effective battery backup power for equipment that does not require sine wave output.
  • Three-Year Warranty
    CyberPower will repair or replace a defective UPS system (including batteries) within three years of the purchase date. See warranty for details.
  • Connected Equipment Guarantee
    CyberPower will repair or replace properly connected equipment if it is damaged by a power surge.
CPS525SL | Standby Series
Protect desktop computers, networks, VoIP, and peripherals
UPS Topology Standby
Voltage 120V
Frequency 60Hz ± 3Hz
Plug Type NEMA 5-15P
Plug Style Right Angle
Cord Length 6'
VA 525
Watts 300
On Battery Voltage 110Vac / 120Vac
On Battery Frequency 60Hz
On Battery Waveform Simulated Sine Wave
Outlet Type NEMA 5-15R
Outlets - Battery & Surge Protected 3
Outlets - Surge-Only Protected 3
Outlets - Widely Spaced 6
Overload Protection Internal circuitry limiting / circuit breaker
Transfer Time 4ms
Run Time 9 - 35 minutes
Battery Type Sealed Lead-Acid
Battery Size 12V/7AH
Replacement Battery BB Battery - BP7-12
Battery Quantity 1
Surge Protection & Filtering
Surge Suppression 585 Joules
Maximum Surge Current 36,000 Amps
Phone Protection RJ11 1-In, 2-Out
Management & Communications
Serial Port Yes
Cable Management Serial Cable
LED Indicators Power On, Wiring Fault
Audible Alarms On Battery, Low Battery, Overload
Software PowerPanel® Personal Edition
Operating Temperature 32 °F to 95 °F / 0 °C to 35 °C
Operating Humidity 0% - 95% non-condensing
Safety UL1778, cUL, FCC DOC Class B
Product Warranty 3 Years Limited
Connected Equipment Guarantee Lifetime
CEG Amount $50,000
CPS525SL | Standby Series
Protect desktop computers, networks, VoIP, and peripherals
CPS525SL | Standby Series
Protect desktop computers, networks, VoIP, and peripherals
Where is the serial number located on the unit?

The serial number is located on a white label adhered to the unit. The serial number is shown directly underneath the barcode.

Why can I not get a dial tone through the communication protection ports of my CyberPower UPS?

First, check to see that the phone cord is securely connected to the UPS and the computer. Next, check to see if you can get a dial tone when you bypass the unit. If you are able to get a dial tone when bypassing the unit, please contact technical support. If you are unable to get a dial tone when bypassing the communication protection ports, please contact your phone company.

Can I use my UPS in conjunction with a generator?

CyberPower Smart App Online Series UPS systems include a Generator Mode setting specifically designed to work with generators. With varying loads, the frequency output from generators can be erratic. This erratic output can make it difficult for a UPS without a Generator Mode setting to recognize the input power, causing the UPS to function on battery power only. With Generator Mode, the UPS can automatically adjust to frequency fluctuations and maintain a full charge of the batteries.

CPS525SL | Standby Series
Protect desktop computers, networks, VoIP, and peripherals
Model Output VA Output Watts Outlets MSRP
CP350SLG 350 VA 255 W 6 NEMA 5-15R $41.95
CP425SLG 425 VA 255 W 8 NEMA 5-15R $49.95
CP550SLG 550 VA 330 W 8 NEMA 5-15R $57.95
Ask a CyberPower tech support representative to contact you.

CyberPower Systems values your privacy and your information will never be rented or sold. Information provided will be used for CyberPower's internal use only. View our Privacy Policy.

Please enter the username or email associated with your My CyberPower account.

Thank you! You should receive an email shortly with information on how to change your password.